Menu Close

Diligent Arty A7-100T: Artix-7 FPGA Development Board for Makers

Original price was: $311.00.Current price is: $303.00.

Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty becomes an incredibly flexible processing platform capable of adapting to whatever your project requires. Unlike other single board computers, Arty isn’t bound to a single set of processing peripherals; one moment it’s a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it’s a meticulous timekeeper with a dozen 32-bit timers.

The Arty A7, formerly known as the Arty, is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, the Arty A7 becomes the most flexible processing platform you could hope to add to your collection, capable of  dapting to whatever your project requires.

Unlike other Single Board Computers, the Arty A7 isn’t bound to a single set of processing peripherals: One moment it’s a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it’s a meticulous timekeeper with a dozen 32-bit timers.

Arty A7-100T: Artix-7 FPGA Development Board for Makers and Hobbyists

Vivado Design Suite voucher not included – Vivado Design Suite Edition is available for free download (Vivado WebPACK).

Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty becomes an incredibly flexible processing platform capable of adapting to whatever your project requires. Unlike other single board computers, Arty isn’t bound to a single set of processing peripherals; one moment it’s a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it’s a meticulous timekeeper with a dozen 32-bit timers.

Buy Online

Additionally, with the universally popular expansion headers (Arduino™ R3 Headers and our Pmod™ headers), Arty will become the most adaptable tool in your project tool box.

Features

  • Internal clock speeds exceeding 450MHz
  • On-chip analog-to-digital converter (XADC)
  • Programmable over JTAG and Quad-SPI Flash
  • 256MB DDR3L with a 16-bit bus @ 667MHz
  • 16MB Quad-SPI Flash
  • USB-JTAG Programming circuitry (Micro USB cable not included)
  • Powered from USB or any 7V-15V source
  • 10/100 Mbps Ethernet
  • USB-UART Bridge
  • 4 Switches
  • 4 Buttons
  • 1 Reset Button
  • 4 LEDs
  • 4 RGB LEDs
  • 4 Pmod connectors
  • Arduino/chipKIT Shield connector

Specifications

  • 1 MSPS On-chip ADC: Yes
  • Logic Cells: 101,440
  • Logic Slices: 15,850
  • Flip-Flops: 126,800
  • Block RAM (Kbits): 4,860
  • Clock Management Tiles: 6
  • DSP Slices: 240

Resources & Downloads

Buy Online

The Arty A7 lets you build a custom system-on-chip (SoC) inside its Artix-7 FPGA. At the heart of the system is MicroBlaze, a 32-bit RISC processor implemented in the FPGA’s programmable logic. You choose the peripherals that surround it. For example, a design might use a timer to trigger periodic measurements, an SPI controller to read a sensor, and a UART to send the results to a computer.

Vivado IP Integrator provides a graphical workspace for building the system. You can select ready-made blocks from its library, including timers and controllers for UART, SPI, and I²C, then connect them to MicroBlaze. For a peripheral with a function or interface of your own, you can describe the hardware in Verilog or VHDL. High-level synthesis also lets you turn suitable C functions into hardware blocks.

A typical MicroBlaze design on the Arty A7 runs at 100 MHz. Some configurations can exceed 200 MHz, depending on the design and whether it meets timing requirements. The board includes 16 MB of non-volatile flash memory for storing FPGA configurations and application code, plus 256 MB of DDR3L RAM for running larger programs and working with data.

Reviews

There are no reviews yet.

Be the first to review “Diligent Arty A7-100T: Artix-7 FPGA Development Board for Makers”

Your email address will not be published. Required fields are marked *