Description
Designed for experiments such as DVI output from a Raspberry Pi Pico, the board connects the source signal pairs to a display cable.
Key Features
- Passive breakout
- 220-ohm series resistors
- Unpopulated EDID EEPROM footprint
$2.55
Add a digital video output connector to a microcontroller project. The source must generate its own video signal.
Designed for experiments such as DVI output from a Raspberry Pi Pico, the board connects the source signal pairs to a display cable.
Extend a 40-pin flat-flex connection in a display or embedded assembly. The board accepts 0.5 mm pitch cables.
Connect an EYESPI display cable to a hand-wired prototype. The board accepts an 18-pin flat-flex cable.
Add a Mini-B connection to a USB-capable microcontroller or a 5 V project. All five connector pins are accessible.
Reviews
There are no reviews yet.