FPGA Marketing — Your Online Store for Development Boards, Microcontrollers & Accessories
FPGA Marketing
Showing 1–16 of 28 results
Prototype a surface-mount IC with up to 32 pins on a breadboard. The two supplied header strips require soldering.
Prototype parallel buses between DIP ICs and dual-row headers. The zigzag copper pattern links corresponding pins while keeping the two rows electrically separate.
Build a soldered prototype on a 50 × 80 mm board. Each plated hole has its own pad for custom connections.
Build a soldered prototype on a 80 × 100 mm board. Each plated hole has its own pad for custom connections.
Build a soldered prototype on a 50 × 80 mm board. Each copper segment links a pair of adjacent component leads.
Build a soldered prototype on a 80 × 100 mm board. Each copper segment links a pair of adjacent component leads.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the dual 830-point BB830 layout.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the 300-point BB300 layout.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the 400-point BB400 layout.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the 400-point BB400 or BB400T layout.
Prototype surface-mount circuits using three SOIC-32 footprints. A through-hole section accommodates headers and DIP components on the same board.
Build a custom surface-mount circuit on a 100 × 100 mil pad grid. A ground plane occupies the reverse side.
Build a custom surface-mount circuit on a 200 × 100 mil pad grid. A ground plane occupies the reverse side.
Build a custom surface-mount circuit on a 50 × 50 mil pad grid. A ground plane occupies the reverse side.