FPGA Marketing — Your Online Store for Development Boards, Microcontrollers & Accessories
FPGA Marketing
Showing 33–48 of 551 results
Drive a stepper motor using the A4988 breakout. The motor supply range is 8–35 V DC.
Generate a finely adjustable analog output from a digital host. The board connects over I2C through STEMMA QT or Qwiic.
Measure small temperature changes with a digital sensor. The ADT7410 breakout connects to an I2C host through STEMMA QT.
Measure ambient temperature and relative humidity with the AHT20. The STEMMA QT connector carries I2C for a plug-in sensor connection.
Add Wi-Fi to an existing microcontroller project. The ESP32 acts as a companion processor to the host board.
Add hardware-backed authentication to a microcontroller project. The board connects through STEMMA QT or Qwiic.
Trigger prerecorded WAV or OGG sound effects from buttons or control signals. Audio files are stored in 16 MB of onboard flash.
Trigger prerecorded WAV or OGG sound effects from buttons or control signals. Audio files are stored in 2 MB of onboard flash.
Trigger prerecorded WAV or OGG sound effects from buttons or control signals. This amplified version includes a 2 × 2 W output stage.
Charge a portable project from USB, DC or a solar source. This version has a buck converter for a regulated 3.3 V output.
Charge a portable project from USB, DC or a solar source. This version has a boost converter for a regulated 5 V output.
Power a low-current circuit or add battery backup for a real-time clock. The board accepts a CR1220 coin cell.
Power a low-current circuit or add battery backup for a real-time clock. The board accepts a CR2032 coin cell.
Drive a brushed DC motor from an embedded controller. The DRV8871 supports resistor-set current limiting.