FPGA Marketing — Your Online Store for Development Boards, Microcontrollers & Accessories
FPGA Marketing
Showing 17–32 of 94 results
Build a soldered prototype on a 6 × 8 cm board with isolated holes. The 2 mm pitch accommodates closely spaced parts.
Add Micro-B USB power or data to a prototype. All five connector pins are available for wiring.
Add a Mini-B connection to a USB-capable microcontroller or a 5 V project. All five connector pins are accessible.
Give a USB peripheral a reversible USB-C connection. The onboard CC resistors configure the connector for use on the device side.
Build a custom cable harness around an inline USB-C socket. Both rows of connector contacts are accessible.
Build an UNO-compatible circuit around this 8-bit AVR microcontroller. It comes with the UNO Optiboot bootloader preloaded.
Prototype a surface-mount IC with up to 32 pins on a breadboard. The two supplied header strips require soldering.
Prototype parallel buses between DIP ICs and dual-row headers. The zigzag copper pattern links corresponding pins while keeping the two rows electrically separate.
Build a soldered prototype on a 50 × 80 mm board. Each plated hole has its own pad for custom connections.
Build a soldered prototype on a 80 × 100 mm board. Each plated hole has its own pad for custom connections.
Build a soldered prototype on a 50 × 80 mm board. Each copper segment links a pair of adjacent component leads.
Build a soldered prototype on a 80 × 100 mm board. Each copper segment links a pair of adjacent component leads.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the dual 830-point BB830 layout.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the 300-point BB300 layout.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the 400-point BB400 layout.
Transfer a tested breadboard circuit to soldered connections. This PCB matches the 400-point BB400 or BB400T layout.