Description
BNC Adapter for Analog Discovery Features Connects standard BNC-terminated test leads & probes to the Analog Discovery’s oscilloscope and waveform generator; Increases the oscilloscope bandwidth from 9 MHz to 30 MHz; Increases the waveform generator bandwidth from 9 MHz to 12 MHz; Jumper-selectable oscilloscope AC and DC coupling; Jumper-selectable 50-ohm or 0-ohm output impedance on arbitrary waveform generator (AWG) channels; Single-ended scope inputs with the negative input connected to the ground; Note: The BNC Adapter Board for the Analog Discovery does not have differential analog (scope) inputs pagebreak Overview BNC probes are the industry standard and provide the highest bandwidth and best signal integrity when connecting an oscilloscope or waveform generator to a circuit being tested. The waveform generator and oscilloscope instruments can be connected in this way using the BNC Adapter for Analog Discovery, while the other ten instruments on the Analog Discovery 2 and Analog Discovery 3 can still be connected conveniently using regular MTE connections. The BNC Adapter combines the portability and versatility of the Analog Discovery with industry-standard capabilities by adding the ability to AC or DC connect the oscilloscope and the choice of either 0 or 50-ohm terminating on the waveform generator. What’s Included BNC Adapter Board for the Analog Discovery (compatible with the Analog Discovery 2 and Analog Discovery 3); Resources & Downloads Using the BNC Adapter (off-site);




Reviews
There are no reviews yet.