Description
Lay out power rails, signal buses and component connections on a regular through-hole grid.
Specifications
- Uncut copper strips
- 2.54 mm hole pitch
- Four mounting holes
$3.75
Build a soldered prototype on a 50 × 80 mm board. The tracks run parallel to the short edge.
Lay out power rails, signal buses and component connections on a regular through-hole grid.
Build a custom surface-mount circuit on a 50 × 50 mil pad grid. A ground plane occupies the reverse side.
Prototype parallel buses between DIP ICs and dual-row headers. The zigzag copper pattern links corresponding pins while keeping the two rows electrically separate.
Build a soldered prototype on a 3 × 7 cm board with isolated holes. The pack contains three boards of the same size.
Reviews
There are no reviews yet.