FPGA Marketing — Your Online Store for Development Boards, Microcontrollers & Accessories
FPGA Marketing
Showing 65–80 of 114 results
Build a compact Wi-Fi device around the ESP32-S2 in the QT Py form factor. This version has a U.FL port for an external antenna.
Build a compact Wi-Fi device around the ESP32-S3 in the QT Py form factor. This version provides 4 MB flash and 2 MB PSRAM.
Build a compact Wi-Fi device around the ESP32-S3 in the QT Py form factor. This version provides 8 MB flash and no PSRAM.
Build a small embedded controller around the SAMD21. Its STEMMA QT port connects compatible I2C peripherals without individual signal wires.
Connect a Qwiic or STEMMA QT peripheral to a breadboard circuit. The breakout makes the I2C bus accessible for prototyping.
Drive a compatible 40-pin TFT display at up to 800 × 480 pixels. A host can also read a four-wire resistive touchscreen through the SPI…
Protect a Raspberry Pi camera board and attach it to a tripod. The camera itself is sold separately.
Generate a programmable clock signal for a prototype. A 25 MHz crystal provides the board’s reference frequency.
Measure ambient temperature and relative humidity with the Si7021. The STEMMA QT connector carries I2C for a plug-in sensor connection.
Control addressable lighting projects with WLED or xLights. The board supports selectable USB-C Power Delivery input voltages.
Add a rotary analog control to a microcontroller project. A matching three-wire cable is included.
Drive a stepper motor using the STSPIN220 breakout. The motor supply range is 1.8–10 V DC.
Isolate USB power or data lines for low-current bench testing. Four switches let you open each wire independently.
Add a battery connector and power switch to a breadboard project. The right-angle JST-PH socket accepts a matching two-pin plug.
Control two DC motors or one stepper from a microcontroller. The dual driver supports up to 1.2 A per channel.
Drive a stepper motor using the TMC2209 breakout. The motor supply range is 5–29 V DC.