Description
Analog Discovery Studio: A Portable Circuits Laboratory for Every Student The Analog Discovery Studio is a fully functional, portable test and measurement device that can turn any cross-functional space into a pop-up electronics laboratory. Equipped with 13 instruments, including an Oscilloscope, Logic Analyzer, Spectrum Analyzer, Waveform Generator, and more; the Analog Discovery Studio provides an entire stack of bench-top instruments with a convenient, replaceable, and breadboardable interface, perfect for enabling student learning anywhere! With lab spaces decreasing and student enrollment increasing, many institutions are choosing studio learning as a supplement to traditional laboratories, creating a need for a portable test and measurement bench that can support all types of circuits projects. With an Analog Discovery Studio, students can continue their hands-on learning in the library, office hours, a tutoring center, a classroom, or even in a coffee shop. The Analog Discovery Studio supports hands-on learning for any student, and is available with free Mac, Linux, and Windows compatible software, WaveForms. Hardware Specifications Analog Inputs Two analog input channels, accessible through BNC or MTE connectors Channel type: differential (with MTE) or single-ended (with BNC) Instruments supported: Oscilloscope, Voltmeter, Network Analyzer, Spectrum Analyzer Analog bandwidth with BNC cables: 30+ MHz @ 3dB, 10 MHz @ 0.5dB, 5 MHz @ 0.1dB Analog bandwidth with MTE flywires: 9 MHz @ 3dB, 2.9 MHz @ 0.5dB, 0.8 MHz @ 0.1dB Input range: ±25V (±50V diff) Input impedance: 1MΩ, 24pF Input protected to: ±50V CMMR (typical): ±0.5% Input coupling: DC only Sample rate (real time): 100 MS/s Resolution: 14-bit Absolute Resolution (scale ≤0.5V/div): 0.32mV Absolute Resolution (scale≥1V/div): 3.58mV Accuracy (scale≤0.5V/div, VinCM = 0V): ±10mV±0.5% Accuracy (scale≥1V/div, VinCM = 0V): ±100mV±0.5% Buffer size/channel: Up to 16k samples Analog Outputs Two function generator channels, accessible through BNC or MTE connectors Channel type: single ended Instruments supported: Waveform Generator (shared w/ Spectrum/Network Analyzers?) Analog bandwidth (BNC or MTE connectors): 8 MHz @ 3dB AC amplitude (max): ±5 V DC Offset (max): ±5 V Slew rate (10V step): 400V/µs Sample rate (real time): 100 MS/s Resolution: 14-bit Absolute Resolution (amplitude ≤1V): 166µV 1V): 665µV Accuracy – typical (Vout ≤ 1V): ±10mV ± 0.5% 1V): ±25mV ± 0.5% Buffer size/channel: up to 16k samples Digital Inputs and Outputs 16 digital input/output channels, accessible through MTE connectors Instruments supported: Digital I/O, Digital Pattern Generator, Logic Analyzer Sample Rate: 100 MS/s Input logic standard: LVCMOS (1.8V/3.3V, 5V tolerant) Output logic standard: LVCMOS (3.3V, 12mA) Buffer size/channel: up to 16K samples Power Supplies 12 Volt Rail: 12V +/-5%; 0.2 Amps max; Max capacitance of 1000uF -12 Volt Rail: -12V +/-5%; 0.2 Amps max; Max capacitance of 150uF 5 Volt Rail: 5.0V +/-5%; 1.0 Amps max; Max capacitance of 1000uF 3.3 Volt Rail: 3.3V +/-5%; 1.0 Amps max; Max capacitance of 1000uF Programmable power supply rails (V+, V-): Voltage range: 1V…5V (V+) and -1V…-5V (V-) Maximum power output: 2.1W for each supply Maximum current output: 700mA for each supply Accuracy (no load): ±10mV Output impedance: 50mΩ (typical) System Power Powered only from Barrel Jack with 15V 2.4A supply Power switch on side of device (labeled “POWER”) Plug outer diameter: 5.5mm Plug inner diameter: 2.5mm Center positive plug Connectivity USB A port available for powering components USB B port for communications with host computer (labeled “DEVICE”) 3.5mm Headphone jack connected to both analog output channels Resources & Downloads Resource Center (Getting Started, Reference Manual, Tech Support)




Reviews
There are no reviews yet.