Description
Position components across the grid to accommodate different lead spacings, then link the pads to form the circuit.
Specifications
- 100 × 80 mm board
- Unplated holes
- 1.6 mm board thickness
$6.75
Build a custom surface-mount circuit on a 50 × 50 mil pad grid. Both sides carry pads for surface-mount circuitry.
Position components across the grid to accommodate different lead spacings, then link the pads to form the circuit.
Build a soldered prototype on a 2 × 8 cm board with isolated holes. The pack contains three boards of the same size.
Build a custom surface-mount circuit on a 50 × 50 mil pad grid. A ground plane occupies the reverse side.
Build a soldered prototype on a 50 × 80 mm board. Each copper segment links a pair of adjacent component leads.
Reviews
There are no reviews yet.